Good plan news PS5 update: which is the cheapest compatible SSD?
The PlayStation 5 update has finally arrived and it is now possible to add memory to your PS5 via an SSD. And we found you the most competitively priced SSD with a heatsink on the market that exactly matches Sony’s criteria.
Sony asks for very specific criteria for the addition of this famous SSD. Indeed, it is necessary that the latter has an M.2 NVMe PCle Gen4 x4 interface, that it is equipped with a heat sink, that its storage is between 250 GB and 4 TB and above all, that it has a 5500MB / s read speed. We managed to find SSDs that meet these criteria and we present to you the one that is currently the cheapest!
The Samsung 980 PRO 500 GB: an SSD for PS5 for less than 130 € at Amazon
The beta of the PlayStation is finally over and it is now possible to increase the memory of your console thanks to an SSD. The latter are starting to become more democratic on the market. It must also be said that they are more reliable and more compact than the usual discs.
But their strong point: it’s speed. Indeed, they are able to deploy read and write speeds that conventional hard drives cannot. Thanks to this, the PlayStation 5 is able to provide a gaming experience that is both fluid and immersive!
This is why Sony asks that an SSD be used as a memory extension for its console. And this SSD from Samsung, the 980 PRO, presents itself as an ideal alternative to SSDs with integrated heat sinks.
Indeed, by combining this SSD with a heat sink purchased separately, your special PS5 SSD will not cost you more than 130 €!
For this, you can turn, in terms of SSD, to the Samsung 980 PRO, in its 7000 MB / s version. The latter corresponds to the technical and physical criteria decreed by Sony.
And on the other hand, you can turn to the Be Quiet heat sink! suitable for this SSD. Tested and approved by the editorial staff, you will be able to considerably increase the storage space of your PS5!
Adding a heat sink to your SSD is particularly easy. Indeed, for that, you just have to take your heat sink, open it and then put the SSD on the bottom part. Close the heatsink, tighten the screws and your SSD is ready to install.
Heat dissipation is highly recommended by Sony. Indeed, in such a confined space, the SSD can quickly heat up. And in this situation, it will automatically lower its speed in order to avoid any overheating.
Thanks to the heat sink, you will not have this problem and you can use the full power of the SSD!
Everything you need to know about SSDs for PS5
How to increase the storage space of the PS5?
There are two ways to increase the storage of your PS5, via an external hard drive (HDD) or via an SSD to insert into your console. However, currently there is only an internal SSD that you will be able to store and run the game.
How to install an internal SSD on the PS5?
To do this, you need a size 1 Phillips screwdriver. After making sure that the console is running the beta system software, unplug it, lay it down and position it in front of you. Remove the cover, unscrew the expansion slot cover, remove the screws, plug in the SSD, screw it in, screw the cover back on and put the outer cover back on. Plug the console back in and follow the instructions in the PS5 format utility so that you can use your new SSD.
Which internal SSDs are compatible with the PS5?
Currently, due to very strict rules for integrating an SSD, only a few models may be suitable. With a heat sink, we will retain the SSD WD_Black SN850, and then, in the category without heat sink, you can count on the Sabrent 2Tb Rocket 4 Plus and the Samsug 980 Pro MZ-V8P1T0BW.
This page contains affiliate links to certain products that JV has selected for you. Each purchase you make by clicking on one of these links will not cost you more, but the e-merchant will pay us a commission.
Find out more.